How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that offers a lot of driver appeal. It has good visibility and a strong performance engine. It also has a top safety rating.
It is crucial to have two keys that work for your vehicle. It is costly to replace a key if you lose it.
How to replace the ignition Key in the Saab9-3
If your car key won't turn in the ignition, you need to replace it. This guide will walk you through the steps to do it on the Saab 9-3. You'll need a new key and a new battery that can be reprogrammed and a new key-fob case.
The most modern Saab models employ transponders instead of a metal key to unlock the car and then start it. The issue with this is that the reprogrammable battery on the key-fob will eventually wear out and won't hold a charge for any longer. This is especially when you use the same key for the lock you have.
saab key fob programming is that the battery can be replaced quite easily by a professional locksmith. You can also do it yourself if have the proper tools and a bit of patience. The first step is to remove the key-fob. Insert an open-ended head into the slot that is in the middle of your case. It is essential to work slowly, since the plastic is thin and can easily be damaged.
Once the case is opened and the case is opened, you can make the new key by combining the lower portion of the old key with the banana and transponder on the new key. This will ensure that the new key is connected to the CIM properly, which could make a big difference when replacing the only key for your Saab 9-3.
How to Replace the Ignition Key in a Saab 900
If you do not have two keys, you will need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you are able to remove the trim and dashboard pieces around the steering wheel. After the dashboard has been removed, you can put a screwdriver in the opening behind the ignition switch.
The ignition barrel is equipped with a lock for keys that could stop the vehicle from starting if it does not contain the key. If the ignition switch on your 900 isn't functioning properly, check whether the key is inside the lock or is stuck in the barrel of ignition. It is also important to rotate your keys and keep them clean to prevent breaking.
Saab cars differ from other vehicles because they do not have traditional metal keys. Instead, the car can recognize the electric signals of the key fob through a special chip in it.
If you lose just one working key fob your dealer will charge the cost of replacing your computer module (also called the CIM). We can reprogram the EEPROM of your computer to make it accept new keys, without having to replace it. This will save you up to 50% of what the dealer charges! We call it the SAAB Key PROGRAM. Find out more about it here!
How to Replace the Ignition Key in the Saab9-5
The metal portion of a traditional Saab key is easy to copy, and is not much of a barrier against theft of a vehicle. The electronic part of the key-fob has an electronic chip that detects the car when the key is placed in the ignition switch.
Saab has relied on the technology of this anti-theft device for more than 10 years. It's not as good as an actual lock on the door but it makes the process of stealing your vehicle harder. Every Saab owner needs to keep an extra Saab key in their car.
The majority of new Saabs are delivered with two keys, but they are also available for purchase at the dealer's expense using a handheld device referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 vehicles, which come with more modern and advanced features that require a separate key-fob to utilize a different process.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and bill you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How do I replace the ignition Key in an XC90 Saab
It could be time to replace your SAAB key fob if you're experiencing difficulty turning the barrel of your lock. The procedure is fairly simple and doesn't require you to visit a dealer. Instead, you can do it yourself at home by using some basic tools.
You'll first need to prepare the new keys. Before you begin, turn off the anti-theft system by placing blocks under your rear wheels, and then releasing your handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories, but it will not start the engine. Repeat this five times, and then leave the key in the "on" position.
The next step is to buy a new case for your key fob. You can find them at any auto parts shop, and they're generally quite affordable. You can buy them without electronics based on the model.
To open up the case, insert a flathead screwdriver in the slot in the middle, and gently work it. The case should split easily and, once you do, you'll have access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.